Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer EHD1035 molded case circuit breaker is intended for systems that require proper and reliable protection from short circuits and current overloads. This highly efficient device could be a key component for safe and secure operation in an environment where any delay in production or any faults during complex processes are inadmissible. The EHD1035 circuit breaker comes from Eaton’s C Series that offers a significant number of different circuit breakers that would answer to the most demanding needs of different applications. These circuit breakers are available with 8 different frames and within a 15 to 2500 Amps current range to fulfill different requirements that specific systems can have. The purpose of these circuit breakers is to provide reliability while holding the optimal level of power continuity without any disruption or unwanted system downtime. Besides that, the use of such circuit breakers will reduce costs and save valuable equipment from damage if current irregularities occur. The Eaton provides high-quality solutions that are built with up-to-date technology and tested according to industry standards.
The UL-listed EHD1035 has an interrupting voltage capacity of 14 kAIC at 277 Volts AC or 125 Volts DC and a maximum continuous amperage rating of 35 Amps (at 40 degrees Celsius). This model of circuit breaker features a NEMA F frame and a fixed thermal magnetic trip. Also, the EHD1035 features cable in/cable out ports and terminals on the load end only. It is important to mention that this circuit breaker comes with non-interchangeable trip units. The EHD type of circuit breaker with an F frame has dimensions that include a height of 152.4 millimeters (6 inches), a width of 34.8 millimeters (1.38 inches), and a depth of 85.7 millimeters (3.38 inches). In addition to that, this circuit breaker weighs 0.9 kilograms or 2 pounds. The standard operating temperature of the EHD1035 is 40 degrees Celsius. Better resistance to higher or lower temperatures can be achieved through special calibration.
| Part Number/Catalog No. | EHD1035 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Interrupting Capacity | 4 kAIC at 277 Volts AC |
| Weight | 2 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 1.38 x 6 x 3.38 inches |
| Part Number/Catalog No. | EHD1035 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Interrupting Capacity | 4 kAIC at 277 Volts AC |
| Weight | 2 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 1.38 x 6 x 3.38 inches |