Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton EDS2110 is a Series C molded case circuit breaker. It is a complete breaker with a built-in magnetic–thermal trip module which is non-interchangeable. The 2-pole EDS2110’s specifications are 240 Volts AC and 125 Volts DC power, 110 Amps of current, and 42 kAIC at 240 Volts AC. Its frequency specifications are 50 to 60 Hertz. To avoid potential equipment damage and injury for installers, the manufacturer’s recommendation is to carry out the installation with the circuit breaker in the off position. It is also recommended to ensure that the working area is clear of high voltages. Other electrical equipment nearby should also be powered off. The F-frame EDS2110 is HACR rated. It is also well-suited for reverse feed operation. The weight of the EDS2110 is approximately 3 pounds. The dimensions of the EDS2110 are 152 millimeters in height, 69.9 millimeters in width, and 85.7 millimeters in depth.
The manual operation of the EDS2110 is controlled by the circuit breaker handle and the push-to-trip button. After tripping occurs, the breaker is reset by moving the breaker handle to extreme off position. However, when a thermal trip occurs, the breaker cannot be reset until the thermal element has cooled sufficiently. The tripping function can be checked by the use of the push-to-trip button which is used to periodically operate the tripping mechanism. Series C breakers such as the EDS2110 are designed for years of trouble-free operation. However, inspection and maintenance as per a periodic schedule are recommended to check for indications of breaker damage and deterioration which could prevent the breaker from operating according to its specifications.
| Part Number/Catalog No. | EDS2110 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 42 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | EDS2110 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 42 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 2.75 x 6 x 3.38 inches |