Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The ED3125 circuit breaker from Series C by Eaton has a Type F Frame style and a molded case. This 3-pole device has a 125 Amps maximum continuous current rating at 40 degrees Celsius temperature and 65 kAIC at 240 Volts AC input voltage. This Type ED circuit breaker uses a maximum voltage of 240 Volts AC and 125 Volts DC which includes terminals on the load end only. The circuit breakers with the F Frame are equipped with load terminals only by default and these terminals are in compliance with standards such as the UL 486A and UL 486B. Generally, the line and load terminals are built as a wire connecting means where special ranges of continuous current ratings and types of wires are required. The F Frame circuit breaker has a Series C NEMA mark and it features cable in/cable out capability. Besides that, the ED3125 has a standard panel mounting method and it features a fixed thermal-magnetic trip. These circuit breakers from Eaton can work with various accessories to further extend their capabilities, and depending on the number of poles in the circuit breaker, there are different combinations of supplementary devices/features that can be added.
Since the ED3125 is a 3-pole circuit breaker, the supported internal accessories for it are auxiliary switches 1A, and 1B and auxiliary switches 2A and 2B on the left or right side and with only 1 internal accessory per pole. In addition to that, the available external accessories for this kind of circuit breaker are the end cap kit, control wire terminal kit, keeper nut, connectors for multiple wires, hardware for base mounting, end covers and shields for the terminal, interphase barriers, various interlocks, plug-in adapters, and other combinations, all in either the left, center, or right position. Besides this, the non-pad-lockable handle blocks external accessories on the center and the cylinder lock on the left are also available for the ED3125 circuit breaker. These circuit breakers can also be modified for special calibration, treatment for moisture and fungus, marine application, and freeze-tested circuit breakers.
| Part Number/Catalog No. | ED3150 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 65 kA @ 240V |
| Interrupting Capacity | 4.5 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 in. |
| Part Number/Catalog No. | ED3150 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 65 kA @ 240V |
| Interrupting Capacity | 4.5 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 in. |