S811T30N3S

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.7 with 6 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


S811T30N3S

Description: The Eaton S811T30N3S Open Soft Starter operates with 30 Amps, a 200-600V Operating Voltage, and a 47-63 Hz Operating Frequency. It has a 200 mm Frame Size and Standard Features.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description:

The Eaton S811T30N3S Open Soft Starter operates with 30 Amps, a 200-600V Operating Voltage, and a 47-63 Hz Operating Frequency. It has a 200 mm Frame Size and Standard Features.




Rated 4.7 with 6 reviews







About S811T30N3S

The Eaton Cutler-Hammer S811T30N3S motor starter is a reduced voltage solid-state motor starter. It can apply a 3-phase soft start in applications such as pump, rock crusher, wood chipper, conveyor, compressor, and bread mixer applications. The S811T30N3S motor starter has a 200-millimeter frame size, and it belongs to the Eaton Intelligent Technology series of motor starters called the S811 series. The unit can be upgraded with MOVs (Metal Oxide Varistors or surge suppressors) that can be mounted on the line side or on the load side of the motor starter. The device can be positioned either horizontally or vertically, but there should be enough clearance (about 4 inches) around the soft starter for good air circulation.

The Eaton S811T30N3S motor starter has a current rating of 304 Amps and it requires a 200 to 600 Volts AC 3-phase power supply. It can digitally send information over relay outputs. Relay 1 is a Form A normally-open contact that closes when the bypass contactor is powered. This signal remains closed until the soft-stop is initiated. Relay 2 is a Form C normally-open contact that is programmed to close when there is a fault condition. The S811T30N3S motor starter can be programmed to act in a certain way in the case of a trip situation. It can be adjusted to automatically reset the trip as soon as the trip condition is no longer present. The other option is to configure the device to work in the manual reset mode. In this case, the operator must press the RESET button on the control panel of the unit to clear an alarm. The digital inputs on the unit are 24 Volts DC rated.


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part NumberS811T30N3S
Product TypeOpen Soft Starter
Frame Size200 mm
Amps30
OptionNo
FeaturesStandard
230V ACHp Rating100
Max. Current Capacity304
Insulating Voltage Ui660V AC
Operating Voltage200-600V AC
Operating Frequency47-63 Hz
Resistance to Shock15G
Bypass Mechanical Lifespan10M
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part NumberS811T30N3S
Product TypeOpen Soft Starter
Frame Size200 mm
Amps30
OptionNo
FeaturesStandard
230V ACHp Rating100
Max. Current Capacity304
Insulating Voltage Ui660V AC
Operating Voltage200-600V AC
Operating Frequency47-63 Hz
Resistance to Shock15G
Bypass Mechanical Lifespan10M
Common misspellings:
  • Sb11T30N3S
  • S8l1T30N3S
  • S81lT30N3S
  • S811T3oN3S