2711-K6C14

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.6 with 12 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


2711-K6C14

Description: The 2711-K6C14 belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal has 5-inch display with built-in Modbus and RS232 communication port.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: The 2711-K6C14 belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal has 5-inch display with built-in Modbus and RS232 communication port.


Rated 4.6 with 12 reviews







About 2711-K6C14

The 2711-K6C14 is a legacy Human Machine Interface (HMI) device for implementing plant floor level automation. The operator terminal is designed by Allen Bradley for the PanelView Standard Operator Terminals. The product line has been discontinued on 12/31/2012 therefore the product is a spare part only. The primary function of the HMI hardware is used to enable operator and machine interaction real-time. It is ideal for use with single machine or process however, it may also be used with multiple partner devices, machines or process. The HMI hardware is installed with a 5-inch TFT colored matrix screen, a replaceable backlight, keypad and communication ports. The keypad has Ten function keys (F1 to F10) capable of up to 2 million presses. The unit is supplied with a rated range of 85-264 VAC and frequency of 47…63 Hz and maximum power consumption of 60VA. The 2711-K6C14 have complied a number of significant certifications such as Emissions (Class A: Industrial EN50081-2:1993, Programmable Controllers Equipment Requirements and Tests EN61131-2:1995, Low Voltage Directive (Safety Sections of EN61131-1), UL1604 Class 1, Div 2, Groups A, B, C, D, T4, CSA 22.2, No. 213 Class 1, Div 2, Groups A, B, C, D, T4, EU Batteries Directive, 2006/66/EC among other important ones. The terminal has a built-in Modbus port for can be used for implementing Modbus RTU communication in RS232 or RS485. Modbus RTU using RS232 wiring is designed for peer to peer communication while MODBUS over RS485 cabling support up to 32 devices in a single segment. It has Three (3) wires for transmit, receive and ground termination. Modbus is developed by Modicon. The terminal has secondary RS232 port for printing alarm list and messages to document and historize alarms. Runtime operation and PanelView 600 terminal can be configured using PanelBuilder32 software.

Technical specifications:


Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-K6C14
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad
Display Type: Color active matrix TFT
Display Area: 115 x 86 mm (4.54 x 3.4 in.).
Resolution:320 x 234
Application memory: 170 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Keypad Lifespan:Actuation: 2 million presses
Communication ports:Modbus; RS232 (printer)
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-K6C14
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad
Display Type: Color active matrix TFT
Display Area: 115 x 86 mm (4.54 x 3.4 in.).
Resolution:320 x 234
Application memory: 170 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Keypad Lifespan:Actuation: 2 million presses
Communication ports:Modbus; RS232 (printer)
Common misspellings:
  • 27l1-K6C14
  • 271l-K6C14
  • 2711-K6Cl4
  • 2711-K6C1A