2711-T10G3L1

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.7 with 9 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


2711-T10G3L1

Description: The 2711-T10G3L1 belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal has a grayscale 10-inch screen size, Touch operator interface with built-in DH485 communication and RS232 printer port.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: The 2711-T10G3L1 belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal has a grayscale 10-inch screen size, Touch operator interface with built-in DH485 communication and RS232 printer port.


Rated 4.7 with 9 reviews







About 2711-T10G3L1

The 2711-T10G3L1 is an industrial electronic hardware made by Allen-Bradley / Rockwell Automation for Human Machine Interface (HMI) applications. Never use the HMI terminal as the sole device capable of handling emergency purposes. It is highly recommended to install a hardwire mechanism of emergency circuitry without the need of the HMI terminal powered on. Use a Direct Current (DC) power source to activate the electronic circuitry of the HMI hardware. Only use a rated supply of 18-32VDC. Configuration parameters are set from the terminal or from the PanelBuilder32 software. Downloaded application have priority over terminal settings. Enable this feature in the Terminal Setup dialog of the PanelBuilder32 software. The process screen is a 10-inch grayscale screen installed with a backlight capable 50,000 hr 1/2 life at 25 °C (77 °F) operation. The screen is touch sensitive allowing the operator to initiate controls and other important HMI functions to the process. The touchscreen specifications includes a membrane made of 384 cells with capability of up to 1 million presses. TheDH485 communication port is compatible for implementing RS232 and RS485 wiring topology. The second RS232 Printer Port can be used to communicate to an alarm printer to send print queues of alarm list and messages. The input power source should be protected by a fuse or circuit breaker rated no more than 15 amps. Incoming power to the PanelView is ideally rerouted by a separate terminal block coupled with a disconnect option for isolation. If power and communication lines must cross, wires must cross at right angles. Communication lines can be installed in the same conduit as low-level dc I/O lines (less than 10 Volts).

Technical specifications:


Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-T10G3L1
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Touch
Display Type: Monochrome LCD blue mode display
Display Area: 211 x 158 mm (8.3 x 6.2 in.)
Resolution:640 x 480
Application memory: 310 application runtime; 1008 KB nonvolatile memory (application objects plus text and bitmaps)
Touchscreen:Touch cells: 128 Actuation: 1 million presses
Communication ports:DH485; RS232 (printer)
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-T10G3L1
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Touch
Display Type: Monochrome LCD blue mode display
Display Area: 211 x 158 mm (8.3 x 6.2 in.)
Resolution:640 x 480
Application memory: 310 application runtime; 1008 KB nonvolatile memory (application objects plus text and bitmaps)
Touchscreen:Touch cells: 128 Actuation: 1 million presses
Communication ports:DH485; RS232 (printer)
Common misspellings:
  • 27l1-T10G3L1
  • 271l-T10G3L1
  • 2711-Tl0G3L1
  • 2711-T1oG3L1
  • 2711-T10G311
  • 2711-T10G3Ll