Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The 7600E, of the PanelMate ePro PS family, is an interface device between the machine and operator. It is a highly efficient, budget-friendly and reliable device manufactured by the Cutler Hammer division of Eaton Corporation. It is a combination of sturdy solid-state hardware and a highly stable Windows XPE operating system with 1GB user memory and a Protect Mode feature that prevents accidental damage of files in a C drive. It delivers the performance of a PC on the shop floor without any associated complexities. It has four USB ports, an Ethernet port, two Serial ports and a video output port. In addition, it contains a PCMCIA slot and a variety of options to expand its memory via a USB Disk or Compact Flash drive.
The 7600E interface is IP65 rated and has dimensions of 9.3 x 12 x 3.6 inches and weighs around 4 pounds and 8 ounces. It is available in two options, which are painted steel or stainless steel. The 7600E can be readily installed and easily operated. It has the ability to replacing any hard-wired system containing indicators or push-buttons among a list of features. This device can be used to not only control and operate a machine but also for data acquisition and SCADA functions. It is advised to power the device with an isolated 4 A, 24 Volt DC supply.
Use a 0.82 millimeter squared copper lead connection to connect the device to the supply line and to ground the device. The maximum power consumption of the 7600E is only 24 Watts, as it is a blind node device, meaning it does not contain a screen. After installation and first-time operation of the device, PanelMate PC Runtime software is provided. OPC drivers are to be downloaded and installed prior to running any type of Canvas application file. Canvas Runtime Software could be used to generate an application for the actual operation. Further, the device can be connected easily to a PLC through an Ethernet port or an interface card.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | 7600E |
| Product Type | PanelMate Operator Interface |
| Display | Blind Node |
| Series | Enterprise Edition |
| Resolution | VGA (640x600), SVGA (800x600), XGA (1024x768) |
| Brightness | N/A |
| Backlight | N/A |
| Voltage Range | 16-30V DC |
| Power Consumption | 24W |
| Current | 1.0A |
| Peak Inrush Current | 7.0A |
| Memory | 1 GB DDR2 RAM |
| Dimensions (HxWxD) | 9.3x12.0x3.6 in. |
| Weight | 4.5 lbs. |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | 7600E |
| Product Type | PanelMate Operator Interface |
| Display | Blind Node |
| Series | Enterprise Edition |
| Resolution | VGA (640x600), SVGA (800x600), XGA (1024x768) |
| Brightness | N/A |
| Backlight | N/A |
| Voltage Range | 16-30V DC |
| Power Consumption | 24W |
| Current | 1.0A |
| Peak Inrush Current | 7.0A |
| Memory | 1 GB DDR2 RAM |
| Dimensions (HxWxD) | 9.3x12.0x3.6 in. |
| Weight | 4.5 lbs. |