Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
This Culter-Hammer by Eaton is an HIM interface. The 7600 is a blind node module, meaning that does not have a display. A blind node module such as this one is generally used for applications that already use external displays. Since this module does not have a display screen, it instead contains a membrane keypad. The 7600 Eaton module can be panel mounted. It should be wired for ground lead and power connections using copper wire, no larger or smaller than 0.82 millimeters squared (18 AWG). A serial connection such as COM2 or RS232 can be used to communicate with a PLC or a controller. Some other communication options are an Ethernet Connection or an Interface Card. This PanelMate ePro PS module uses the Canvas editing software for configuration. All ePro modules have standard fast Ethernet functionalities to allow for communication and transfer of data.
The 7600 Eaten module has an embedded Windows NT operating system, which allows elimination of unnecessary features, a USB port, a VGA port, and a half-sized slot, meant for certain authorized ISA cards (including a Square D Modbud Plus, an SST PROFIBUS DP, and an SST ControlNet). To install one of these cards, first disconnect the module from any power source. The back of the PanelMate ePro unit can be removed with a screwdriver, as can the screw that secures the card slot cover. After installing the card into the unit, securely replace all covers and screws.
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | 7600 |
Product Type | PanelMate Operator Interface |
Display | Blind Node |
Series | PS |
Resolution | VGA (640x600), SVGA (800x600), XGA (1024x768) |
Brightness | N/A |
Backlight | N/A |
Voltage Range | 16-30V DC |
Power Consumption | 24W |
Current | 1.0A |
Peak Inrush Current | 7.0A |
Memory | 512MB DDR2 RAM |
Dimensions (HxWxD) | 9.3x12.0x3.6 in. |
Weight | 4.5 lbs. |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | 7600 |
Product Type | PanelMate Operator Interface |
Display | Blind Node |
Series | PS |
Resolution | VGA (640x600), SVGA (800x600), XGA (1024x768) |
Brightness | N/A |
Backlight | N/A |
Voltage Range | 16-30V DC |
Power Consumption | 24W |
Current | 1.0A |
Peak Inrush Current | 7.0A |
Memory | 512MB DDR2 RAM |
Dimensions (HxWxD) | 9.3x12.0x3.6 in. |
Weight | 4.5 lbs. |