Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer HVX025A1-2A1N1 is an AC drive which belongs to the HVX9000 series. The HVX025A1-2A1N1 operates on three-phase 230 Volts AC input voltage (208 to 240 Volts AC range). The acceptable range of input frequencies is from 45 to 66 Hertz. The output of the drive is rated for 25 Horsepower and 72 Amps. The output voltage can vary from 0 to the input voltage and the output frequency range is from 0 to 320 Hertz. The drive is provided with standard software and standard boards. The HVX025A1-2A1N1 includes an alphanumeric keypad which functions as the human-machine interface. An LCD is provided for displaying status information. The drive does not include a brake chopper circuit. The control methods supported by the drive are the frequency control (V/F) and the open-loop sensorless vector control. The switching frequency range is 1 to 10 kiloHertz with the default being 3.6 kiloHertz.
Support for the following protection mechanism is provided on the HVX025A1-2A1N1: overcurrent, undervoltage, earth fault, over-temperature, motor overload, motor stall, motor underload, and short-circuit protection for the 10 to 24 Volts DC reference voltages. The HVX025A1-2A1N1 is available in a NEMA Type 1 enclosure (frame size 7). HVX9000 drives can be stacked vertically or mounted side-by-side. Dimensions of the drive are 24.8 x 9.3 x 10.1 inches and the weight of the drive is 77.2 pounds. The working temperature range is from -10 to 40 degrees Celsius at 0 to 95% non-condensing relative humidity. The minimum airflow required around the drive for adequate cooling is 250 CFM.
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | HVX025A1-2A1N1 |
Product Type | AF Drive |
Product Family | HVAC Drive |
Horsepower Rating | 25 |
Software Series | Standard Software |
Enclosure | NEMA Type 1 |
Voltage Rating | 230 V |
Brake Chopper Options | No Brake Chopper Circuit |
Board Modifications | Standard Boards |
Keypad | Alphanumeric |
Input Options | 3-phase, EMC H |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | HVX025A1-2A1N1 |
Product Type | AF Drive |
Product Family | HVAC Drive |
Horsepower Rating | 25 |
Software Series | Standard Software |
Enclosure | NEMA Type 1 |
Voltage Rating | 230 V |
Brake Chopper Options | No Brake Chopper Circuit |
Board Modifications | Standard Boards |
Keypad | Alphanumeric |
Input Options | 3-phase, EMC H |