Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer HVX010A1-4A1B1 is an adjustable frequency drive that is part of the HVX9000 series that comes with a NEMA Type 1 enclosure, a three-phase EMC H input, an internal brake chopper circuit, and standard boards. This controller, with a frame size of FR5, also features an alphanumeric display with a backlight and keypad input that is equipped with a HAND/OFF/AUTO selector for the drive’s mode of operation, a DRIVE/BYPASS selector, 2 control source indicators, 9 pushbuttons, and 9 status indicators specifically for the drive’s RUN status. Note that the display installed is specifically for the RUN status of the HVX010A1-4A1B1 drive. This drive is also capable of simultaneously monitoring and displaying up to three parameters.
The voltage rating of this drive is 380 to 500V and its nominal voltage is 480V and HP rating is 10. It also comes with a -15% and +10% input voltage tolerance, as well as a 0 to the rated input voltage output voltage range. The frequencies of the HVX010A1-4A1B1 drive are 50/60 Hz for the input and with a variation of 45 to 66 Hz and 0 to 320 Hz for the output. This drive also has a 0.1 Hz frequency resolution and should only operate at -10 to 40 °C temperature ranges. The applications suitable for this drive include those that require an HVAC, pump, and fluid control. The HVX010A1-4A1B1 drive also features two control methods, which are frequency vector control (V/f) open loop control, and sensorless vector control. It also has various safety features available, including protection against undervoltage, motor overload, motor stall, overtemperature, overcurrent, input phase, overvoltage, motor stall, earth fault, motor underload, and short circuit.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | HVX010A1-4A1B1 |
| Product Type | AF Drive |
| Product Family | HVAC Drive |
| Horsepower Rating | 10 |
| Software Series | Standard Software |
| Enclosure | NEMA Type 1 |
| Voltage Rating | 480V |
| Brake Chopper Options | Internal Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Keypad | Alphanumeric |
| Input Options | 3-phase, EMC H |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | HVX010A1-4A1B1 |
| Product Type | AF Drive |
| Product Family | HVAC Drive |
| Horsepower Rating | 10 |
| Software Series | Standard Software |
| Enclosure | NEMA Type 1 |
| Voltage Rating | 480V |
| Brake Chopper Options | Internal Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Keypad | Alphanumeric |
| Input Options | 3-phase, EMC H |