HVX01031B1SA

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.9 with 16 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


HVX01031B1SA

Description: Eaton- DRIVE AC 10HP 208V NEAM3R HVX 9000

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: Eaton- DRIVE AC 10HP 208V NEAM3R HVX 9000


Rated 4.9 with 16 reviews







About HVX01031B1SA

The Eaton Cutler-Hammer HVX01031B1SA HVX 9000 Adjustable Frequency AC Drive is an intelligent variable frequency drive, in the HVX 9000 Series of IntelliPass Drives with integral bypass configuration which provides excellent control suitable for HVAC, pump, and fluid control applications. The HVX01031B1SA features the Eaton Cutler-Hammer Intellipass Bypass feature with mechanically and electrically interlocked contacts, solid motor overload relay, an additional power source to ensure power redundancy and additional ride-thru capability, and it has a serial communication interface, which enables control of the motor. It has a voltage rating of 208 Volts AC at 50 to 60 Hertz, with a drive power rating of 10 Horsepower, and it has an NEC-rated output current of 30.8 Amps. The HVX01031B1SA has an input tolerance range of -15% to +10% at 45 to 66 Hertz line input frequency, and it has a maximum short-circuit rating of 65KAIC. It has in-built overvoltage, under voltage, over temperature, stalling, motor overload, and motor unload protection, and it has a drive efficiency greater than 95%, with a displacement power factor of 0.96.


The HVX01031B1SA provides motor control through the frequency control (V/f), and the Sensorless Vector Control in open-loop applications, and it provides output control using signals with an adjustable carrier frequency range of 1 to 16 KHz. It has a programmable output frequency range of 0 to 320 Hertz, with a selectable output voltage range of 0 to the rated input voltage, and it has a current overload capacity of 110% for 1 minute. The HVX01031B1SA offers independent acceleration and deceleration times, programmable from 0 to 3000 seconds, and it is designed with a DC brake (plus a brake chopper). It has 6 digital inputs with 18 to 24 Volts DC Logic control, with one 0 to -/+10 Volts DC analog input, it has 1 open collector 48 Volts, 50mA digital output, with 2 programmable Form C Relay outputs. It has an operating temperature range of -10 to 40 degrees Celsius (14 to 104 degrees Fahrenheit) at 0 to 95% non-condensing and non-corrosive relative humidity, and it is stored at a -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit) temperature range in a NEMA Type 3R enclosure. The HVX01031B1SA has total shipping dimensions of 601 x 137 x 390 millimeters, with a net weight of 16.0 kilograms, and it is UL and IEC certified.


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.HVX01031B1SA
Product TypeAF Drive
Product FamilyHVAC Drive
Horsepower Rating10
Software SeriesStandard Software
EnclosureNEMA Type 3r with Intellipass
Voltage Rating208V AC
Brake Chopper OptionsInternal Brake Chopper Circuit
Enclosure StyleIntellipass
Enclosure OptionSpace Heater
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.HVX01031B1SA
Product TypeAF Drive
Product FamilyHVAC Drive
Horsepower Rating10
Software SeriesStandard Software
EnclosureNEMA Type 3r with Intellipass
Voltage Rating208V AC
Brake Chopper OptionsInternal Brake Chopper Circuit
Enclosure StyleIntellipass
Enclosure OptionSpace Heater
Common misspellings:
  • HVXo1031B1SA
  • HVX0l031B1SA
  • HVX01o31B1SA
  • HVX0103lB1SA
  • HVX0103181SA
  • HVX01031BlSA