Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Allen-Bradley HVX003A2-4A1B1 Drive is a product in the HVX9000 AF series. It has a 3-phase nominal input voltage of 480V and it can operate in ranges between 380V and 500V. The output voltage can be adjusted from 0 to the input voltage level. Its horsepower rating is about 3HP or 2.2kW. The input frequency varies between 45 and 66Hz with a 50-60Hz default rate. The output frequency is programmable within a range of 0-320Hz and a frequency resolution of 0.01 Hz. The enclosure for this drive is a NEMA 12 type. The HVX003A2-4A1B1 has an ambient operating temperature of -10-40 degrees Celsius. The storage temperature is between -40 and 70 degrees Celsius with a relative humidity of up to 95% noncondensing and non-corrosive. The operational vibration is up to 1G at 15.8-150 Hz and it has an altitude limit of up to 1000 meters (3,300 feet). Above that, the HVX003A2-4A1B1 will derate at 1% of the drive rated amps.
The HVX003A2-4A1B1 is necessary to use +75° C or higher heat-resistant copper cables. The maximum length of the cables should be about 984 ft. (300m). The motor cables should cross other cables at a 90-degree angle. This type of drive uses a specific UL cable that ensures the compatibility of the cable towards the drive. The HVX003A2-4A1B1 uses an FR4 cable for its frame size and 4.8-5.6 A for its NEC input current. The wire size for the power and ground cables is similar with a value of 14. The terminal size for the power terminal is 16-12 and the same is true for the ground terminal. The approximate dimensions for the HVX003A2-4A1B1 is 327 x 128 x 190 mm (12.9 x 5 x 7.5in.) and it has a mass of 5kg (11lb).
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | HVX003A2-4A1B1 |
Product Type | AF Drive |
Product Family | HVAC Drive |
Horsepower Rating | 3 |
Software Series | Standard Software |
Enclosure | NEMA Type 12 |
Voltage Rating | 480V |
Brake Chopper Options | Internal Brake Chopper Circuit |
Board Modifications | Standard Boards |
Keypad | Alphanumeric |
Input Options | 3-phase, EMC H |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | HVX003A2-4A1B1 |
Product Type | AF Drive |
Product Family | HVAC Drive |
Horsepower Rating | 3 |
Software Series | Standard Software |
Enclosure | NEMA Type 12 |
Voltage Rating | 480V |
Brake Chopper Options | Internal Brake Chopper Circuit |
Board Modifications | Standard Boards |
Keypad | Alphanumeric |
Input Options | 3-phase, EMC H |