Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
This Cutler-Hammer module, the D100CR20A, is a 20 I/O Programmable Logic Controller (PLC) with a manual and high-speed counter and an analog input expandable. The D100CR20A is a stand-alone controller with its own Central Processing Unit (CPU), memory, power supply and input/output circuitry with terminals. It also has a 1K RAM memory and a backup battery. This controller can also be upgraded to having analog capabilities, by connecting an Analog Input Module to it before connecting any installed expansion module; this must be done to give the controller two analog inputs. The two analog Inputs thus added does not affect the controller’s overall I/O count. Each analog channel with twelve set points has three input ranges: 0 to 10 Volts, 0 to 5 Volts, and 0 to 20 milliamperes DC. Analog signals are converted to a register value and then stored in an assigned register. Each of the twelve registers is assigned preset values. The signal register is repeatedly compared with these preset values in the registers, in order to control circuits in the system.
The D100CR20A’s total 20 I/O ports, comprised of 12 inputs and 8 outputs, with a system maximum of 24 inputs and 16 outputs. This module’s power supply is 115 Volts AC and its inputs are 24 Volts DC, while this module’s outputs are a relay type. Its input current ratings are 10 mA (120 Volts AC, 60 Hertz), and its maximum OFF and ON delay is 15 milliseconds, at 100 Volts AC. The OFF and ON level is 25 Volts AC and 75 Volts AC respectively and capable of withstanding a voltage of 1500 Volts AC per minute. The high-speed counter in this controller has a special connector for the count, as well as hard rest input terminals. The counting speed is 4 kHz while the minimum count input and the hard-rest input pulse widths are 100 µs and 6 milliseconds respectively. The counting range is 4 digits decimal or 8 digits decimal, as selected by the user. Comparison points in 4 digits and 8 digits mode is 30 and 15 points, respectively.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | D100CR20A |
| Product Type | 20 I/O Controller |
| Power Supply | 115V AC |
| Inputs | 12 |
| Input Type | 24V DC |
| Outputs | 8 |
| Output Type | Relay |
| System Max I/O Inputs | 24 |
| System Max. I/O Outputs | 16 |
| Capability | High Speed Count and Analog |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | D100CR20A |
| Product Type | 20 I/O Controller |
| Power Supply | 115V AC |
| Inputs | 12 |
| Input Type | 24V DC |
| Outputs | 8 |
| Output Type | Relay |
| System Max I/O Inputs | 24 |
| System Max. I/O Outputs | 16 |
| Capability | High Speed Count and Analog |